Slide

HERA

Product code S33000


Electromechanical slim line extending ram for swing gates up to 4.0 M and 400Kg

 

 

-Powerful and quiet. Strong aluminum with bronze gearing system.
-Quick and simple to install, it can easily fit on almost any kind of swing gate.
-Power supply 230V, suitable for intensive use and emergency opening release mechanisem.

Main Features
HERA

Aluminum casting body ensure durability of operator both in operating heavy gates and harsh climates.

Technologies
Operators with 230v power supply are suitable for heavy gates like what are used for commercial and industrial purpose. BLANCO 230v series are equipped with thermal break sensors and passed several standards to ensure safety and durability.
An electromechanical operator is a combination of an electromotor and a gear box that results to a soft, controlled movement in addition to minimum erosion. In comparison to hydraulic operators, electromechanical systems are cheaper and less sensitive to temperature variations.
The thrust must be under control! Unlike conventional control units which apply constant trust during maneuver, Blanco smart torque management system gathers data from several sensors and analysis them through microprocessor. As a result, sufficient level of thrust is applied to the gate according to output force, wind level, gate weight and etc. this technology not only provide soft movement during operation but also, prevent damages to the system and several errors.
There will not be looking for release key in emergency situations and power failure cases. Everybody is able to release operators easily by Allen key (Hex key).
Control unit programing have not been so easy! It required only few steps to start quick setting and the control unit will set required values for normal operation automatically based on existing conditions like gate weight.
User friendly is a key significant in BLANCO products. It ensures fast and easy installation just by following installation and safety guides.
These series of BLANCO products are suitable for industrial purpose and designed for heavy and oversized gates.

hera4

Technical features PLUS L ADVANCED
Product type HERA – S HERA- M HERA-L
Input power supply 230 V
Motor voltage 230 V
Power consumption 264 W
Max. width of door/gate wing 2.5 m 3m 4m
Max. weight of door/gate wing 300 kg 350kg 400kg
Useful rod stroke 285 mm 350mm 390mm
Maximum angle 100 ° 110° 120°
Cycle time 14 s 16s 18s
Absorbed current 0.8  ~ 1.2 A
Slowdown Yes
Locking Mechanical
Release Allen key
Impact reaction Anti-crash
Frequency of use intensive
Protection rating IP54
Environmental conditions -30 ÷ 70 °C

 

hera-11-1 Photocells Flasher 01 Board Box11 Board Blanco allen-key-001
 Remote x 2 Beam Sensors  Flasher Board Box Main Board Allen key
Brackets03 Brackets 02 Brackets 02
Brackets Brackets Brackets

Hera-07 Hera-06 Hera-05 Hera-04 Hera-03